-
Save 20%
Ê The Practical Single-Hand Sword is based on the Marshall sword, so named for one of EnglandÕs finest knights of the latter half of the 12th century. The sword is classically styled, with a cruciform hilt, wheel pommel and a ridged-and-fullered blade that is both stiff and surprisingly light. With a weight of less than 2 _ lbs., the sword can be wielded forcefully without undue wear and tear on the arm. Our Practical broadswords (SH2106, SH2046, SH2047) are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of todayÕs re-enactment societies. The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16Ó wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grips are leather-covered. The scabbards are fabricated in glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimize blade corrosion problems. The scabbards now feature belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona. Made for the re-enactor Authentic look and feel Complies with safety requirements Blade length: 30Ò Handle length: 6 1/2Ó Overall length: 36 1/2Ò Weight: 2lb 7oz Thickness at Guard: .230 Box height: 28Ó Box width: 6Ó Specs will vary slightly from piece to piece. -
Save 28%
-
Save 20%
Although Basket-Hilt swords appeared throughout Britain from the mid-sixteenth century on, their association with the seventeenth and eighteenth century Scottish highlander has become legendary. Our Basket-Hilt Broadsword, replicated from an original in the collection of the Royal Armouries in England, carries a typical Glasgow-style hilt from the mid-18th century. It is likely that the blade of the original sword, marked “Andrea Ferara”, was made in Germany a century earlier and re-hilted as basket designs were refined. The hilt is crafted in stainless steel, to minimize maintenance, while the blade is forged in high-carbon steel. The grip is covered with wire-wrapped genuine rayskin and the basket liner, like the original, is crafted in fabric-covered sueded leather. The scabbard is leather-covered. See model SH2002N for the antique-finished version of this sword. Made by Hanwei. SpecificationsOverall: 39 3/4“ Blade Length: 33 1/2“ Handle Length: 6” Weight: 3lb 1oz Point of Balance: 5" Point of Harmonics: 2 Width at Guard: 1.79" Width at Tip: 1.19" Thickness at Guard: .18" Thickness at Tip: .08" Specs will vary slightly from piece to piece. Product DetailsBasket-Hilt Broadsword Key FeaturesAuthentic replica of Museum Piece Fully functional Scabbard included -
Save 20%
The Swiss and Germans originally carried these weapons, although Bastard swords soon became popular in other regions such as the British Isles and Europe. The term Bastard undoubtedly comes from the fact that the sword, because of its design, has no legitimate claim to being classified as either a uniquely single-handed or two-handed weapon. The Bastard sword was a weapon developed for the use of the foot soldier and had became quite common by the early 1500’s. The combat styles developed for the Bastard sword were the particular specialty of the Northern European cultures, with the Germanic nations being at the forefront in its development and use. Our Bastard Sword is finished in an antique patina, making for an outstandingly authentic appearance. The included scabbard features metal chape and tip in the same patina as the furniture with a solid wood core. Well Balanced Great for re-enactors Hanwei quality Overall length: 50 1/8“ Blade length: 38 3/4“ Weight: 3lb 10oz Point of Balance: 5.5" Point of Percussion: 25" Width at Guard: 1.94" Width at Tip: .95" Thickness at Guard: .22" Thickness at Tip: .16" Specs will vary slightly from piece to piece -
Save 20%
You will be absolutely combat ready with the Combat Commander Spartan Sword in your hands. Originally used by the mighty Spartans, the full-tang, 23 1/2" sharp blade is of 1050 carbon steel and has a black hard coating finish. The handle is fiber filled ABS with a soft textured TPR covering and is as tough as they get! A nylon sheath with a protective PVC liner lets you house it with ease. It is 29 3/4" in overall length. -
Save 20%
Our Hand-and-a-Half Sword is replicated from a sword thought to be that of Albrecht II of Austria and represents the pinnacle of beauty and balance in medieval swords. Classically simple in design with a flattened diamond-section blade and cruciform hilt, the original dates from the early part of the 15th century. The “Lion Rampant” emblem of the Habsburg dynasty is engraved in the pommel, while the Passau “Running Wolf” guild mark and a marigold maker’s mark appear on the blade fuller. Both the grip and the scabbard are leather covered over a cord wrap.See models SH2034N for the antique-finished version and SH2016 for the “Practical” version of the Hand-and-a-Half sword. Authentic replica of Museum Piece Fully functional Excellent handling and balance Overall length: 44 1/2“ Blade length: 34 3/4“ Handle length: 10” Product height: Weight: 3lb 4oz Point of Balance: 5 1/2" Point of Percussion: 21 1/2" Width at Guard: 2" Width at Tip: .9" Thickness at Guard: .24" Thickness at Tip: .20" Box height: 49 1/4” Box width: 8 1/4” Specs will vary slightly from piece to piece. -
Save 20%
This version of a 16th century piece provides an economical and versatile cutting sword. Balance is excellent, providing a sword which lends itself to both single and two-handed use. Made by Hanwei. SpecificationsOverall: 38 1/4" Blade Length: 27 1/4" Handle Length: 11" Weight: 2lb 13oz Specs will vary slightly from piece to piece. Key FeaturesForged High-Carbon Blade Scabbard included Peened Pommel -
Save 20%
Combining the slashing power of the Samurai Katana with the agility and thrusting ability of fine European dueling swords, the Dark Sentinel (SH2066) is a handsome sword with a bite. Light and quick enough for single-hand fencing but with the ability to turn on awesome two-handed power, the Dark Sentinel will guard the castle gates against all would-be usurpers - without draining the Royal treasury! The forged high-carbon steel blade is complemented by a studded leather-wrapped grip with a stylized tsuba-like guard. A leather-covered scabbard with steel fittings completes the package. Forged high-carbon steel blade Studded leather-wrapped grip Fully functional Overall Length: 47-1/4" Blade: 31-1/2" Handle: 10-1/2" Thickness: .23" Weight: 2lbs 3oz The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
The single-hand Lionheart Sword is typical of the cruciform-hilt style of the crusading knights of Europe in the 12th and 13th centuries. The wheel pommel and slightly turned-down bow-tie guard make this a very attractive sword. Made by Hanwei. SpecificationsOverall: 33 1/2" Blade Length: 27" Handle Length: 6 1/2" Weight: 2lb 8oz Specs will vary slightly from piece to piece. Key FeaturesForged High-Carbon Blade Scabbard included Peened Pommel -
Save 31%
In the age of sail, officers were expected to fight right alongside common deckhands. An officer never made his choice of weapon recklessly when he knew he to had to fight hand to hand to repel boarders. The clear choice was a Spadroon as his primary edged weapon. It was lighter than a cutlass, offered a long, stiff blade, was imminently suitable for thrusting, and had a sharp edge capable of delivering a stinging cut. Original antique Spadroons are quite scarce, and far too valuable to use as actual weapons, but luckily you can get a Cold Steel reproduction. Loosely modeled on historical examples, our Spadroon has been hardened to a spring temper, with a combat sharp edge and capable delivering a fearsome cut as well as a lethal thrust. It's handsome too, with a multi ridged faux ivory grip and a gorgeous brass hilt replete with the requisite five ball counter guard and knuckle bow. Not to be outshined, the scabbard is equally impressive. It's fashioned from rich black leather, and hand stitched, and comes with a mirror polished, solid brass chape, throat, and carrying rings. Name: Officer's Five Ball Dirk Blade Length: 14" Overall Length: 19" Steel: 1055 Carbon Weight: 10.9 oz Handle: 5" Scabbard: Leather Scabbard With Brass Fittings -
Save 10%
The Pecoraro Sabre features a full-cupped perforated guard, ridged for reinforcement at the thinner pommel end of the "D".The high-carbon steel blade is very flexible towards the tip. A replacement blade (OH2264) is available. One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military sabre. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted for sabre at the Military Masters School in Rome. The hilt designs developed by Radaelli and Pecoraro have been reproduced in our fencing sabers, with stainless steel guards and wire-wrapped sharkskin-pattern grips. The high-carbon flex-tempered steel blades closely follow the proportions of the period and are button-tipped for safety. The blade and hilt of the “Hutton” sabre are closer to the style of the true military sabre. Made by Hanwei. SpecificationsOverall: 40 ¼” Blade Length: 34” Handle Length: 5 ¾” Weight: 1lb 5oz Specs will vary slightly from piece to piece. Key FeaturesDeuling Sabre High-Carbon Flex-Tempered Blade Replacement Blade Available -
Save 20%
Designed for the rapier fencer with a preference for the cup-hilt style who wishes to spar in safety, our Practical Cup-Hilt Rapier fits the bill perfectly. The rapier blade is similar in design to the practical blades for the swept-hilts but the length of the tang is adapted to the cup-hilt. The SH2262 Main Gauche matches this rapier. Made by Hanwei. SpecificationsOverall: 44 1/2" Blade Length: 37" Weight: 2lb Point of Balance: 5 1/2" Point of Harmonics: 20" Width at Guard: .75" Width at Tip: .40" Thickness at Guard: .25" Thickness at Tip: .10" Specs will vary slightly from piece to piece. Product DetailsPractical Cup Hilt Rapier Key FeaturesSafe Sparring High-Carbon Flex-Tempered Blade Matching Set -
Save 20%
The Radaelli Sabre features a fully-ridged guard with the classic reinforcing ring common to the Radaelli style.The high-carbon steel blade is very flexible towards the tip. A replacement blade (OH2264) is available. One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military sabre. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted for sabre at the Military Masters School in Rome. The hilt designs developed by Radaelli and Pecoraro have been reproduced in our fencing sabers, with stainless steel guards and wire-wrapped sharkskin-pattern grips. The high-carbon flex-tempered steel blades closely follow the proportions of the period and are button-tipped for safety. The blade and hilt of the “Hutton” sabre are closer to the style of the true military sabre. Overall: 40 ¼” Blade Length: 33 ¾” Handle Length: 5 ¾” Weight: 1lb 7oz -
Save 20%
Our Rhinelander Bastard sword, typical of late 15th century central European cut-and-thrust swords, is a handsome piece that will be appreciated by both collectors and cutting enthusiasts. The ring-guard hilt and scent-stopper pommel balance a riveted-tang fullered blade, forged in 5160 high-carbon steel and hardened to 54HRc for an optimal combination of edge-holding and resilience. A leather-wrapped scabbard is included. 5160 High-Carbon Steel Designed to cut Leather covered scabbard included Overall: 45 1/4" Blade Length: 35 3/4" Handle Length: 6 3/4" Weight: 3 lb 4 oz Blade Steel: 5160 Hrc Edge: 54 HRc -
Save 20%
The River Witham Sword was dredged from the River Witham near the town of Lincoln during work carried out in 1788. The sword may be a remnant of the Battle of Lincoln in 1141, but it is more likely that it was made between 1250-1300 CE. The inscription on the blade reads: +NDXOXCHMDRCHDXORVI+. Made by Hanwei. SpecificationsOverall: 38 1/4" Blade Length: 31 1/2" Handle Length: 6 3/4" Weight: 3lb 8oz Specs will vary slightly from piece to piece. Key FeaturesForged High-Carbon Blade Scabbard included Peened Pommel -
Save 20%
This is a replacement blade for the Pecoraro Hanwei mode (SH2199) and Radaelli Hanwei model (SH2200) historical fencing sabres. Made by Hanwei. Key Features: Replacement Blade For Sh2199 and Sh2200 Sabres Blade Fencing Sabre Blade Blade Length: 40 ¼” Weight: 8oz Specs will vary slightly from piece to piece. -
Save 20%
The War Sword is a hand-and-a-half design from the early 14th century. The hardwood grip and elongated scent-stopper pommel make the 32” blade surprisingly easy to handle Made by Hanwei. SpecificationsOverall: 40 1/2" Blade Length: 32 1/2" Handle Length: 8" Weight: 2lb 12oz Specs will vary slightly from piece to piece. Key FeaturesForged High-Carbon Blade Scabbard included Peened Pommel
