-
Save 20%
Ê The Practical Single-Hand Sword is based on the Marshall sword, so named for one of EnglandÕs finest knights of the latter half of the 12th century. The sword is classically styled, with a cruciform hilt, wheel pommel and a ridged-and-fullered blade that is both stiff and surprisingly light. With a weight of less than 2 _ lbs., the sword can be wielded forcefully without undue wear and tear on the arm. Our Practical broadswords (SH2106, SH2046, SH2047) are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of todayÕs re-enactment societies. The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16Ó wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grips are leather-covered. The scabbards are fabricated in glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimize blade corrosion problems. The scabbards now feature belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona. Made for the re-enactor Authentic look and feel Complies with safety requirements Blade length: 30Ò Handle length: 6 1/2Ó Overall length: 36 1/2Ò Weight: 2lb 7oz Thickness at Guard: .230 Box height: 28Ó Box width: 6Ó Specs will vary slightly from piece to piece. -
Save 20%
This all-leather 15th century soldier's pouch will compliment the outfits of many re-enactors and role-players, as well as providing useful carrying space. This particular purse is crafted in roughout leather, with a belt loop and a buckle closure. Approximately 7-1/4" x 6" Made by GDFB. Product Details15th Century Soldiers Pouch - Roughout Key FeaturesCrafted in Roughout Leather Belt loop and Buckle Closure -
Save 28%
-
Save 20%
Although Basket-Hilt swords appeared throughout Britain from the mid-sixteenth century on, their association with the seventeenth and eighteenth century Scottish highlander has become legendary. Our Basket-Hilt Broadsword, replicated from an original in the collection of the Royal Armouries in England, carries a typical Glasgow-style hilt from the mid-18th century. It is likely that the blade of the original sword, marked “Andrea Ferara”, was made in Germany a century earlier and re-hilted as basket designs were refined. The hilt is crafted in stainless steel, to minimize maintenance, while the blade is forged in high-carbon steel. The grip is covered with wire-wrapped genuine rayskin and the basket liner, like the original, is crafted in fabric-covered sueded leather. The scabbard is leather-covered. See model SH2002N for the antique-finished version of this sword. Made by Hanwei. SpecificationsOverall: 39 3/4“ Blade Length: 33 1/2“ Handle Length: 6” Weight: 3lb 1oz Point of Balance: 5" Point of Harmonics: 2 Width at Guard: 1.79" Width at Tip: 1.19" Thickness at Guard: .18" Thickness at Tip: .08" Specs will vary slightly from piece to piece. Product DetailsBasket-Hilt Broadsword Key FeaturesAuthentic replica of Museum Piece Fully functional Scabbard included -
Save 20%
The Swiss and Germans originally carried these weapons, although Bastard swords soon became popular in other regions such as the British Isles and Europe. The term Bastard undoubtedly comes from the fact that the sword, because of its design, has no legitimate claim to being classified as either a uniquely single-handed or two-handed weapon. The Bastard sword was a weapon developed for the use of the foot soldier and had became quite common by the early 1500’s. The combat styles developed for the Bastard sword were the particular specialty of the Northern European cultures, with the Germanic nations being at the forefront in its development and use. Our Bastard Sword is finished in an antique patina, making for an outstandingly authentic appearance. The included scabbard features metal chape and tip in the same patina as the furniture with a solid wood core. Well Balanced Great for re-enactors Hanwei quality Overall length: 50 1/8“ Blade length: 38 3/4“ Weight: 3lb 10oz Point of Balance: 5.5" Point of Percussion: 25" Width at Guard: 1.94" Width at Tip: .95" Thickness at Guard: .22" Thickness at Tip: .16" Specs will vary slightly from piece to piece -
Save 20%
Owing its genesis to the medieval corn-threshing implement, the military flail was a fearsome disabling weapon with its ability to reach out to a distance far exceeding the length of its shaft and with its iron weights travelling at lethal speeds. Dimensions as yet unknown. We also offer a wide selection of GDFB helmets and other protective clothing for the re-enactor Flail Medieval military weapon -
Save 20%
Our Hand-and-a-Half Sword is replicated from a sword thought to be that of Albrecht II of Austria and represents the pinnacle of beauty and balance in medieval swords. Classically simple in design with a flattened diamond-section blade and cruciform hilt, the original dates from the early part of the 15th century. The “Lion Rampant” emblem of the Habsburg dynasty is engraved in the pommel, while the Passau “Running Wolf” guild mark and a marigold maker’s mark appear on the blade fuller. Both the grip and the scabbard are leather covered over a cord wrap.See models SH2034N for the antique-finished version and SH2016 for the “Practical” version of the Hand-and-a-Half sword. Authentic replica of Museum Piece Fully functional Excellent handling and balance Overall length: 44 1/2“ Blade length: 34 3/4“ Handle length: 10” Product height: Weight: 3lb 4oz Point of Balance: 5 1/2" Point of Percussion: 21 1/2" Width at Guard: 2" Width at Tip: .9" Thickness at Guard: .24" Thickness at Tip: .20" Box height: 49 1/4” Box width: 8 1/4” Specs will vary slightly from piece to piece. -
Save 20%
This version of a 16th century piece provides an economical and versatile cutting sword. Balance is excellent, providing a sword which lends itself to both single and two-handed use. Made by Hanwei. SpecificationsOverall: 38 1/4" Blade Length: 27 1/4" Handle Length: 11" Weight: 2lb 13oz Specs will vary slightly from piece to piece. Key FeaturesForged High-Carbon Blade Scabbard included Peened Pommel -
Save 20%
The Hsu Sword Bag is very strongly made in a heavy Cordura fabric with leather reinforcing. It will accommodate any of the single-hand Jians. Will hold any one-handed Adam Hsu Jian 7 1/2 x 5 Accessory Pocket Heavy Cordura Overall length: 45 Specs will vary slightly from piece to piece. -
Save 20%
Combining the slashing power of the Samurai Katana with the agility and thrusting ability of fine European dueling swords, the Dark Sentinel (SH2066) is a handsome sword with a bite. Light and quick enough for single-hand fencing but with the ability to turn on awesome two-handed power, the Dark Sentinel will guard the castle gates against all would-be usurpers - without draining the Royal treasury! The forged high-carbon steel blade is complemented by a studded leather-wrapped grip with a stylized tsuba-like guard. A leather-covered scabbard with steel fittings completes the package. Forged high-carbon steel blade Studded leather-wrapped grip Fully functional Overall Length: 47-1/4" Blade: 31-1/2" Handle: 10-1/2" Thickness: .23" Weight: 2lbs 3oz The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
Each piece in the Geat wave Series (SH5004, SH5002, & SH5022) is stylized with the renowned Tomoe motif. The tsuba, fuchi, & kashira are made of black iron and marked with the Tomoe crest (mon). The blades are hand-forged from T10 high-carbon steel and are differentially tempered using traditional claying methods. The temper line (hamon) is evident and prominent. Each piece has a deeply lacquered black saya with a one-piece brass habaki construction. Real ray skin (same) is used on the tsuka, and the tsuka-ito and sageo are made of premium woven Japanese black cotton. The katana and wakizashi are constructed with a large o-kissaki and are ideal for cutting exercises (tameshigiri). The handle on the tanto is an attractive ribbed buffalo horn. Overall Length: 40-1/2" Blade: 28" Handle: 11-1/2" Thickness: .30" Weight: 2lbs 10oz The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
Due to demand, CAS offers high quality Sword Cases (OH2158 & OH2159) for your traveling needs. These sword cases are available in a medium and large size. They are constructed from black high-density fabric and the bottom of the bag is reinforced with thick leather. A shoulder strap and carrying handle are equipped on the cases for traveling convenience. Each case has two inside zipped-compartments for storage security and an outer compartment for maintenance supplies. These cases can hold a plethora of swords depending on various shapes and sizes. These sword cases are perfect for those who travel frequently with their swords across country or across town. Product Width: 8-1/2" Overall Length: 52-1/4" The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
The Practical Pro Katana has an extended tsuka and a thicker and longer blade . The blade is made of hand forged high carbon steel and is differentially tempered using a traditional claying method. The Practical Pro has a finer polish than other pieces in the Practical series. The tsuka is wrapped with synthetic black leather specialty developed for its gripping characteristics and is double-pegged for safety. The saya is done in a deep black lacquer with a black Japanese cotton sageo. The fittings (koshirae) are done in antiqued black iron. The katana is stylized with a round Kuruma tsuba, which represents the "Wheel of Dharma", symbolizing the Buddhist concept of the Noble Eightfold Path. For those interested in an economical katana that can stand the rigors of heavy cutting (tameshigiri), the Practical Pro is an excellent choice. Overall Length: 45-3/4" Blade: 29-1/2" Handle: 15" Thickness: .36" Weight: 3lbs The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
The Practical Shinobi Ninja-to, whose construction patterns closely that of the Practical Katana, is a wonderful addition for those studying the Way of the Ninja. The blade is made of hand forged high carbon steel and is differentially tempered using a traditional claying method. All the fittings (koshirae) are done in antiqued black iron. The ornate tsuba displays the kuji-kiri (energy-channeling hand positions) employed by the mystical ninja. The tsuka is wrapped in a synthetic ray skin (same), available in black (SH2268) or white (SH1071), and the tsuka-ito is done in durable synthetic black leather. The saya had flat black finish with demon-head bindings for the black Japanese cotton sageo and an intricate kojiri on the end of the says. A sword no practitioner of Ninjutsu should be without. Overall Length: 34-1/2" Blade: 22-3/4" Handle: 10-1/4" Thickness: .28" Weight: 1lbs 14oz The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
The Practical Series (SH1070, SH2061, & SH2254) represent CAS's most popular set, offering excellent quality at a great price. The blades are hand forged high carbon ste3el and are differentially tempered using a traditional claying method to produce a HRC60 on the edge (ha) and a HRC40 on the back (mune) with a medium (chu) kissaki. The temper line (hamon) is authentic and prominent. The fittings (koshirae) are superbly antiqued adding to the aesthetics of the set. The saya is done in a deep black lacquer and the sageo is black Japanese cotton. The tsuka-ito is wrapped in synthetic leather with great gripping characteristics and imitation ray skin (same) is used. Cost savings are affected by using fittings, which, while making no claims to authenticity, are very strongly built to withstand the rigors of cutting exercises (tameshigiri). Overall Length: 39-1/2" Blade: 27-1/4" Handle: 11-1/4" Thickness: .27" Weight: 2lbs 5oz The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
The Shuriken darts of the Ninja included various projectiles such as dirks, darts and star shaped discs, all forming part of the art of shurikenjutsu, which was an important part of the Ninja's armory. The Shuriken Set tempered darts in a canvas forearm band and the darts are black plated in the Ninja tradition. Overall Length: 6-1/4" Blade: 3-1/4" Handle: Thickness: 2 Weight: 14oz The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 19%
Free copy of 'The Kouga Ninja Scrolls' included in the first 250 Kouga and Iga Ninja-To! The neighboring Kouga and Iga clans of feudal Japan were bitter enemies for centuries and their warring Ninja families have been immortalized in Japanese literature. To commemo- rate these secretive warriors we have introduced our Kouga and Iga Ninja-To. The Tsuka of the Iga Ninja-To features a traditional wrap over natural rayskin and Clouds and Sun/Water and Moon Menuki. The blackened iron fittings include a Tsuba displaying the Iga Mon and a wave motif, both repeated on the Fuchi/Kashira. The Saya features a partial rattan wrap and a heavily reinforced spike. The Iga features a forged high carbon blade, differentially quenched to an edge hardness of 60HRc. Essential tool for the Ninjutsu practitioner. Made by Hanwei. SpecificationsOverall: 3 Blade Length: 22" Handle Length: 10 1/2" Weight: 2lb 3oz Specs will vary slightly from piece to piece. Product DetailsIga Ninja-To Key FeaturesForged high-carbon steel blade High quality fittings Rattan wrapped saya -
Save 20%
The single-hand Lionheart Sword is typical of the cruciform-hilt style of the crusading knights of Europe in the 12th and 13th centuries. The wheel pommel and slightly turned-down bow-tie guard make this a very attractive sword. Made by Hanwei. SpecificationsOverall: 33 1/2" Blade Length: 27" Handle Length: 6 1/2" Weight: 2lb 8oz Specs will vary slightly from piece to piece. Key FeaturesForged High-Carbon Blade Scabbard included Peened Pommel -
Save 10%
The Pecoraro Sabre features a full-cupped perforated guard, ridged for reinforcement at the thinner pommel end of the "D".The high-carbon steel blade is very flexible towards the tip. A replacement blade (OH2264) is available. One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military sabre. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted for sabre at the Military Masters School in Rome. The hilt designs developed by Radaelli and Pecoraro have been reproduced in our fencing sabers, with stainless steel guards and wire-wrapped sharkskin-pattern grips. The high-carbon flex-tempered steel blades closely follow the proportions of the period and are button-tipped for safety. The blade and hilt of the “Hutton” sabre are closer to the style of the true military sabre. Made by Hanwei. SpecificationsOverall: 40 ¼” Blade Length: 34” Handle Length: 5 ¾” Weight: 1lb 5oz Specs will vary slightly from piece to piece. Key FeaturesDeuling Sabre High-Carbon Flex-Tempered Blade Replacement Blade Available -
Save 20%
Designed for the rapier fencer with a preference for the cup-hilt style who wishes to spar in safety, our Practical Cup-Hilt Rapier fits the bill perfectly. The rapier blade is similar in design to the practical blades for the swept-hilts but the length of the tang is adapted to the cup-hilt. The SH2262 Main Gauche matches this rapier. Made by Hanwei. SpecificationsOverall: 44 1/2" Blade Length: 37" Weight: 2lb Point of Balance: 5 1/2" Point of Harmonics: 20" Width at Guard: .75" Width at Tip: .40" Thickness at Guard: .25" Thickness at Tip: .10" Specs will vary slightly from piece to piece. Product DetailsPractical Cup Hilt Rapier Key FeaturesSafe Sparring High-Carbon Flex-Tempered Blade Matching Set -
Save 20%
Developed in response to requests from Wushu practitioners for swords with ultra-flexible blades, the Practical Wushu (SH2062) has a spring steel blade that tapers to almost paper-thin at the tip. The light weight (barely one pound) of the sword makes it extremely fast in skilled hands. The OH2057 Carrying Case and the OH2078 Tassel will also fit this sword perfectly. Made by Hanwei. Highly flexible Very light and quick Audible "Water Song" Overall length: 36 1/2“ Blade length: 30“ Handle length: 6 1/2” Weight: 1lb Point of Balance: 2 1/2" Width at Guard: 1.11" Width at Tip: .86" Thickness at Guard: .16" Box height: 41 1/4” Box width: 4” Specs will vary slightly from piece to piece -
Save 20%
Our Practical Katanas have always been at the forefront of providing economical yet functional swords to the martial arts community. These latest Practicals combine the blade geometries and profiles of the Performance Series with the affordability of our Practical fittings. The blades in the cutting styles are forged from 1566 steel and differentially hardened in the traditional way producing an edge hardness of HRC60 and spine hardness of HRC40. The removeable handle is tightly wrapped in the tradtional style with imitation leather to provide a positive grip that will withstand years of tameshigiri practice. Competitive Cutting / Lighter Weight The XL Light blades feature the same geometry as those of the XL but incorporate deeply cut grooves (bo-hi) to reduce the weight of the blade while retaining most of it’s strength and cutting ability. This weight reduction makes for a quicker sword, well adapted for multiple cuts in lighter targets. High-Carbon Blade Performance Series XL Light Blade Built for Martial Artists Blade length: 28 ½” Handle length: 11 Overall length: 40 ½” Weight: 2lb 9oz Point of Balance: 5 1/2" Width at Guard: 1.45" Width at Tip: 1.06" Thickness at Guard: .27" Thickness at Tip: .18" Sori: 3/4" Specs will vary slightly from piece to piece. -
Save 20%
The Radaelli Sabre features a fully-ridged guard with the classic reinforcing ring common to the Radaelli style.The high-carbon steel blade is very flexible towards the tip. A replacement blade (OH2264) is available. One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military sabre. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted for sabre at the Military Masters School in Rome. The hilt designs developed by Radaelli and Pecoraro have been reproduced in our fencing sabers, with stainless steel guards and wire-wrapped sharkskin-pattern grips. The high-carbon flex-tempered steel blades closely follow the proportions of the period and are button-tipped for safety. The blade and hilt of the “Hutton” sabre are closer to the style of the true military sabre. Overall: 40 ¼” Blade Length: 33 ¾” Handle Length: 5 ¾” Weight: 1lb 7oz -
Save 20%
The Raptor Shinogi-Zukuri blade, which has evolved as the most common Japanese katana blade design, provides both speed and cutting power. Featuring a distinct yokote, such blades were originally produced after the Heian period, around 987 AD. 5160 high-carbon steel Overall length: 42. Blade length: 28" Handle length: 11" Weight: 2lb 10oz Specs will vary slightly from piece to piece. -
Save 20%
Our Rhinelander Bastard sword, typical of late 15th century central European cut-and-thrust swords, is a handsome piece that will be appreciated by both collectors and cutting enthusiasts. The ring-guard hilt and scent-stopper pommel balance a riveted-tang fullered blade, forged in 5160 high-carbon steel and hardened to 54HRc for an optimal combination of edge-holding and resilience. A leather-wrapped scabbard is included. 5160 High-Carbon Steel Designed to cut Leather covered scabbard included Overall: 45 1/4" Blade Length: 35 3/4" Handle Length: 6 3/4" Weight: 3 lb 4 oz Blade Steel: 5160 Hrc Edge: 54 HRc -
Save 20%
The River Witham Sword was dredged from the River Witham near the town of Lincoln during work carried out in 1788. The sword may be a remnant of the Battle of Lincoln in 1141, but it is more likely that it was made between 1250-1300 CE. The inscription on the blade reads: +NDXOXCHMDRCHDXORVI+. Made by Hanwei. SpecificationsOverall: 38 1/4" Blade Length: 31 1/2" Handle Length: 6 3/4" Weight: 3lb 8oz Specs will vary slightly from piece to piece. Key FeaturesForged High-Carbon Blade Scabbard included Peened Pommel -
Save 20%
This is a replacement blade for the Pecoraro Hanwei mode (SH2199) and Radaelli Hanwei model (SH2200) historical fencing sabres. Made by Hanwei. Key Features: Replacement Blade For Sh2199 and Sh2200 Sabres Blade Fencing Sabre Blade Blade Length: 40 ¼” Weight: 8oz Specs will vary slightly from piece to piece. -
Save 20%
Each of our Rapier Minis faithfully replicates period swords in every detail. The blades are forged from maraging steel, a steel typically associated with the sport fencing world, then tempered in a process unique to this material, creating the flexibility inherent in the rapier style. Our line of Mini-Swords features miniature replicas of several of our full-sized swords, all with fully tempered blades and correctly detailed hilts. Each comes with an attractive wood and metal display stand with a metal placard identifying the sword type, origin and approximate period of use. Each piece is furnished in a clam shell presentation box and handsome black and gold sleeve, making an exceptional gift. Overall length: 8 5/8” Specs will vary slightly from piece to piece. -
Save 20%
The Tori Elite Katana combines truly elegant furniture and a powder-steel forged and folded blade with the functionality of our Performance Series. Designed for multiple cuts in normal targets, the Tori Elite features a ”Flying Crane” themed Tsuba and Fuchi/Kashira with Kabuto inspired Menuki. The high quality brown leather Tsuka-ito is wrapped over black Same. The Saya is wrapped at the mouth with black-lacquered rattan and finished in a textured brown. Made by Hanwei. Performance Elite Blade Geometry Premium fittings Built for Martial Artists Overall length: 40” Blade length: 28” Handle length: 11” Weight: 2lb 7oz Point of Balance: 5" Width at Guard: 1.34" Width at Tip: 1.0 Thickness at Guard: .25" Thickness at Tip: .16" Sori: 3/4" Specs will vary slightly from piece to piece. -
Save 20%
The Tori katana combines truly elegant furniture and a powder-steel folded blade with the functionality of our Performance Series. The Tori features a ”Flying Crane” themed Tsuba and Fuchi/Kashira while the Menuki are Kabuto or Japanese helmets. The high quality brown leather Tsuka-ito is wrapped over black Same. The Saya is wrapped at the mouth with black-lacquered rattan and then finished in a textured brown. The Tori is available in three folded steel cutting blade profiles and three Iaito blade lengths. Heavy Competitive Cutting Designed strictly for competitive cutting, our XL Katana blades incorporate the geometry, strength, weight and profile needed for successful cuts on substantial targets. Featuring differential heat treatment and a narrow edge angle, these wide blades will reward good technique with clean cuts and excellent durability. Blade length: 28 ½” Handle length: 11” Overall length: 40 ½” Weight: 2lb 11oz Point of Balance: 5" Width at Guard: 1.44" Width at Tip: 1.12" Thickness at Guard: .24" Thickness at Tip: .1 Sori: 3/4"
