-
Save 31%
Perfect for upgrading your sharpening system or replacing used stones. Can be used with all GATCO® sharpening systems. All accessory hones contain our patent pending adjustable sliding guide rod and finger protection rails. 350/400 Grit Triangular hone Restores dull serrated blades to full cutting performance -
Save 32%
Built just as tough as the Gator Machete, the Junior is shorter and more packable. The two-sided blade has both a fine edge for hacking brush and vines and a rough cut saw edge for cutting branches, limbs and small trees. It’s a high-carbon steel shaft with a Gator grip handle. For back-country travel, when every bit of weight is accounted for, the Gator Jr. is the right machete. Overall Length: 18.75" Blade Length: 10.75" Weight: 14.30 oz. Head: High Carbon Steel Handle: Gator-Grip Sheath: Nylon -
Save 32%
Gator Machete w/ Nylon SheathThe Gator Machete has a 15-inch fine-edge blade on one side and an 18-inch high performance saw blade on the other. It’s forged of high-carbon stainless steel. The handle is covered with a Gator grip rubberized handle for comfort and control. It comes sheathed in a nylon case for secure carry. Made for use in the wilderness, as well as the backyard, it’s a dual-purpose, lightweight machete for beating back the underbrush and trailblazing Overall Length: 25.7" Blade Length: 18" Weight: 18 0z. Head: High Carbon Steel Handle: Gator-Grip -
Save 17%
This knife features a 5160 high carbon steel and black texture powder coated, saber ground blade. Kraton handle, full tang and black nylon sheath included. Specifications Blade: 9.436" Overall: 15.25" Blade Thickness: 0.25" Made in USA -
Save 21%
The latest masterpiece in Gil Hibben’s legendary custom-designed knife lineup is this show-stopping Hibben Sawback Survival Tanto. Featuring a razor-sharp 7Cr17 stainless steel beast of a blade with a bead-blasted finish, this powerful tanto is stout! It offers a double-serrated sawback design with an oversized guard and cord wrapped handle. Unscrew the end cap to find a built-in compass. Includes embossed leather sheath. Razor-sharp 7Cr17 stainless steel blade Double-serrated sawback design Bead-blasted blade finish Cord wrapped handle Built-in compass Leather sheath 9 ½” blade 14 ¼” overall -
Save 31%
The new Kershaw Grinder is designed to be put to work. To that end, the Grinder offers a blade with a slightly curved belly for all-purpose cutting and slicing. A clipped, tanto-inspired tip offers excellent piercing capabilities, too. If you need to bear down on the back of the blade during a particularly tough cutting job, the concave spine with heavy jimping provides additional grip security. The work-ready blade is made of 4Cr13MoV steel for solid service. The Grinder is always ready to go to work quickly thanks to our SpeedSafe assisted opening and convenient built-in flipper. A secure liner lock keeps the blade securely open during work until the user releases it. The glass-filled nylon handle is ergonomically contoured to fit the hand securely and grooved to offer an extra-secure grip. The deep-carry pocketclip is easily reversible for tip-down, right- or left-handed carry. SpeedSafe® assisted opening with flipper Liner lock Reversible pocketclip (left/right, tip-down) Steel: 4Cr13MoV, bead-blasted finish Handle: Glass-filled nylon Blade length: 3.25 in. (8.3 cm) Closed length: 4.5 in. (11.4 cm) Open length: 7.75 in. (19.7 cm) Weight: 4.5 oz. (127.6 g) -
Save 25%
The "Gris" is the offspring of the MF-1 and our newfound love of the bead-blast process. We found that with a lot of creativity and a little experimentation, we could create an entirely different personality for our "Go To" fixed blade. The heritage of the MF-1 is such that the price will always be within reach to those who are REALLY using this knife. It's hard to believe that a knife with such a simple design can evoke such interest among knife lovers. SPECIFICATIONS Overall Length 9 1/2" Blade Length 4 1/2" Blade Material 420HC Blade Style Mantis Techno Tip Handle Material 420HC Lock Style Fixed Blade Carry System Custom Nylon Sheath Weight 5.6 oz. Special Features Length allows user superior leverage in a fixed blade, engineered for use with paracord wrap -
Save 17%
Lying at the intersection of function and fantasy are the breathtaking Brous Series knives, designed in conjunction with Jason Brous, a 10-year CNC machinist and knife-making maestro. The Growl epitomizes the art of linear design, with a multi-faceted stainless steel blade and molded plastic handle, every bit as suitable for your wall as it is for your belt. Overall Length 8.1" 20.57 cm Product Weight 5.40 oz 153.09 g Blade Length 3.6" 9.14 cm Blade Thickness 0.25" 0.64 cm UPC 7-29857-99792-8 Product Type Fixed Blade Country of Origin China Packaging Unibox - Display Ready Engravable Yes Finish Satin Edge Type Straight Blade Steel Type 9Cr18MoV Blade Shape Tanto Handle Material Glass-Reinforced Nylon Handle Color Black Hardness Rc. 58-60 Sheath Included Yes Sheath Color Black Sheath Attachment Type Belt Loop Sheath Closure Type Snap / Hook and Loop -
Save 25%
Ti-Nitrate coated Stainless Steel Handle: Black Aluminum Blade Style: Drop Point Plain Blade Length: 3.75 inch -
Save 25%
Ti-Nitrate coated Stainless Steel Handle: Black Aluminum Blade Style: Tanto, 1/2 Serrated Blade Length: 3.75 inch -
Save 25%
Ti-Nitrate coated Stainless Steel Handle: Green Aluminum Blade Style: Drop Point 1/2 Serrated Blade Length: 3.75 inch -
Save 20%
Our Hand-and-a-Half Sword is replicated from a sword thought to be that of Albrecht II of Austria and represents the pinnacle of beauty and balance in medieval swords. Classically simple in design with a flattened diamond-section blade and cruciform hilt, the original dates from the early part of the 15th century. The “Lion Rampant” emblem of the Habsburg dynasty is engraved in the pommel, while the Passau “Running Wolf” guild mark and a marigold maker’s mark appear on the blade fuller. Both the grip and the scabbard are leather covered over a cord wrap.See models SH2034N for the antique-finished version and SH2016 for the “Practical” version of the Hand-and-a-Half sword. Authentic replica of Museum Piece Fully functional Excellent handling and balance Overall length: 44 1/2“ Blade length: 34 3/4“ Handle length: 10” Product height: Weight: 3lb 4oz Point of Balance: 5 1/2" Point of Percussion: 21 1/2" Width at Guard: 2" Width at Tip: .9" Thickness at Guard: .24" Thickness at Tip: .20" Box height: 49 1/4” Box width: 8 1/4” Specs will vary slightly from piece to piece. -
Save 20%
This version of a 16th century piece provides an economical and versatile cutting sword. Balance is excellent, providing a sword which lends itself to both single and two-handed use. Made by Hanwei. SpecificationsOverall: 38 1/4" Blade Length: 27 1/4" Handle Length: 11" Weight: 2lb 13oz Specs will vary slightly from piece to piece. Key FeaturesForged High-Carbon Blade Scabbard included Peened Pommel -
Save 16%
-
Save 16%
Hand Forged and Folded AISI 1060 high Carbon steel blade. Made with the true and tested Japanese standards for forging. This battle ready sword is one of Ryumon's quality swords. Live steel and vary sharp edge (ha). True tempering the traditional way using forging clay to keep the ha (edge) very hard and show an authentic hamon. Features: Battle Ready Blade Material: Folded AISI 1060 high Carbon Steel. 45 HRC Shinogi-ji and HRC 58 edge (ha) Tang: FULL with double pegged handle for safety. Iron tsuba and furniture. One piece blade collar (habaki). Handle Material: Hardwood with Authentic Ray Skin wrapped with quality Black Cotton Cord ito. Scabbard Material: High gloss lacquered hardwood scabbard with cotton sageo. Includes: Certificate of Authenticity. Satin Sword Bag. Collectors Hang Tag. Reference Guide. Includes Cleaning Kit. -
Save 15%
29" hand forged red carbon steel blade anodized for copper tone 10-1/2" black finish genuine ray skin wrapped handle Traditional pattern black leather wrapping Brass blade collar Black iron guard 39-1/2" overall length Black lacquer finished scabbard Packaged in a deluxe wood box Cotton sword bag and sword stand included -
Save 15%
Handmade, sharp carbon steel blade White leather wrapped handle with authentic black Same rayskin underwrap Or Brown Leather with white rayskin Blade has engraving on both sides Black lacquered wood saya with white sageo Black sword bag included Full tang, double pegged handle Fully Functional -
Save 20%
The Hsu Sword Bag is very strongly made in a heavy Cordura fabric with leather reinforcing. It will accommodate any of the single-hand Jians. Will hold any one-handed Adam Hsu Jian 7 1/2 x 5 Accessory Pocket Heavy Cordura Overall length: 45 Specs will vary slightly from piece to piece. -
Save 20%
Combining the slashing power of the Samurai Katana with the agility and thrusting ability of fine European dueling swords, the Dark Sentinel (SH2066) is a handsome sword with a bite. Light and quick enough for single-hand fencing but with the ability to turn on awesome two-handed power, the Dark Sentinel will guard the castle gates against all would-be usurpers - without draining the Royal treasury! The forged high-carbon steel blade is complemented by a studded leather-wrapped grip with a stylized tsuba-like guard. A leather-covered scabbard with steel fittings completes the package. Forged high-carbon steel blade Studded leather-wrapped grip Fully functional Overall Length: 47-1/4" Blade: 31-1/2" Handle: 10-1/2" Thickness: .23" Weight: 2lbs 3oz The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
Each piece in the Geat wave Series (SH5004, SH5002, & SH5022) is stylized with the renowned Tomoe motif. The tsuba, fuchi, & kashira are made of black iron and marked with the Tomoe crest (mon). The blades are hand-forged from T10 high-carbon steel and are differentially tempered using traditional claying methods. The temper line (hamon) is evident and prominent. Each piece has a deeply lacquered black saya with a one-piece brass habaki construction. Real ray skin (same) is used on the tsuka, and the tsuka-ito and sageo are made of premium woven Japanese black cotton. The katana and wakizashi are constructed with a large o-kissaki and are ideal for cutting exercises (tameshigiri). The handle on the tanto is an attractive ribbed buffalo horn. Overall Length: 40-1/2" Blade: 28" Handle: 11-1/2" Thickness: .30" Weight: 2lbs 10oz The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
Due to demand, CAS offers high quality Sword Cases (OH2158 & OH2159) for your traveling needs. These sword cases are available in a medium and large size. They are constructed from black high-density fabric and the bottom of the bag is reinforced with thick leather. A shoulder strap and carrying handle are equipped on the cases for traveling convenience. Each case has two inside zipped-compartments for storage security and an outer compartment for maintenance supplies. These cases can hold a plethora of swords depending on various shapes and sizes. These sword cases are perfect for those who travel frequently with their swords across country or across town. Product Width: 8-1/2" Overall Length: 52-1/4" The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
The Practical Pro Katana has an extended tsuka and a thicker and longer blade . The blade is made of hand forged high carbon steel and is differentially tempered using a traditional claying method. The Practical Pro has a finer polish than other pieces in the Practical series. The tsuka is wrapped with synthetic black leather specialty developed for its gripping characteristics and is double-pegged for safety. The saya is done in a deep black lacquer with a black Japanese cotton sageo. The fittings (koshirae) are done in antiqued black iron. The katana is stylized with a round Kuruma tsuba, which represents the "Wheel of Dharma", symbolizing the Buddhist concept of the Noble Eightfold Path. For those interested in an economical katana that can stand the rigors of heavy cutting (tameshigiri), the Practical Pro is an excellent choice. Overall Length: 45-3/4" Blade: 29-1/2" Handle: 15" Thickness: .36" Weight: 3lbs The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
The Practical Shinobi Ninja-to, whose construction patterns closely that of the Practical Katana, is a wonderful addition for those studying the Way of the Ninja. The blade is made of hand forged high carbon steel and is differentially tempered using a traditional claying method. All the fittings (koshirae) are done in antiqued black iron. The ornate tsuba displays the kuji-kiri (energy-channeling hand positions) employed by the mystical ninja. The tsuka is wrapped in a synthetic ray skin (same), available in black (SH2268) or white (SH1071), and the tsuka-ito is done in durable synthetic black leather. The saya had flat black finish with demon-head bindings for the black Japanese cotton sageo and an intricate kojiri on the end of the says. A sword no practitioner of Ninjutsu should be without. Overall Length: 34-1/2" Blade: 22-3/4" Handle: 10-1/4" Thickness: .28" Weight: 1lbs 14oz The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
The Practical Series (SH1070, SH2061, & SH2254) represent CAS's most popular set, offering excellent quality at a great price. The blades are hand forged high carbon ste3el and are differentially tempered using a traditional claying method to produce a HRC60 on the edge (ha) and a HRC40 on the back (mune) with a medium (chu) kissaki. The temper line (hamon) is authentic and prominent. The fittings (koshirae) are superbly antiqued adding to the aesthetics of the set. The saya is done in a deep black lacquer and the sageo is black Japanese cotton. The tsuka-ito is wrapped in synthetic leather with great gripping characteristics and imitation ray skin (same) is used. Cost savings are affected by using fittings, which, while making no claims to authenticity, are very strongly built to withstand the rigors of cutting exercises (tameshigiri). Overall Length: 39-1/2" Blade: 27-1/4" Handle: 11-1/4" Thickness: .27" Weight: 2lbs 5oz The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 20%
The Shuriken darts of the Ninja included various projectiles such as dirks, darts and star shaped discs, all forming part of the art of shurikenjutsu, which was an important part of the Ninja's armory. The Shuriken Set tempered darts in a canvas forearm band and the darts are black plated in the Ninja tradition. Overall Length: 6-1/4" Blade: 3-1/4" Handle: Thickness: 2 Weight: 14oz The images used herein are © and CAS Iberia, inc. 650 Industrial Blvd-.Sale Creek, TN. 37373 USA. Used by Permission. All Rights Reserved -
Save 31%
Cordura sheath for the Cold Steel Heavy Machete. Sheath only. Machete sold separately. -
Dark OPS strictly enforces MAP pricing. MAP must be followed in order to advertise these knives for sale MAP $179.95 The HellFighter X-21 Tactical light is one of the most advanced weapon mountable entry lights on the market today. Its shock isolated bulb can endure the pounding of large caliber automatic weapons fire. With an astonishing output of 500 lumens (Xenon), they are the brightest 12 volt weapon lights in the world. Constructed of the world's toughest materials and tested in the battle of Baghdad and south-central Los Angeles, the HellFighters have the proven reliability required for lethal environments. The Interrogator impact bezel is made from 6160 through hardened aluminum. Features: Tactical light Material: MIL STD 6061 511 T6 Aircraft Aluminum alloy, body functions as heat sink Sturdy aircraft grade aluminum body Lamp: Xenon / Halogen / Argon high intensity vapor-sealed, incandescent high temperature filament bulb Runtime: To 1 hour (dependent on battery performance), 3 hour on LED and rechargeable Lamp mounting: Permanent soldered, spring isolated shock resistant on weapon axis to 1250G Lens: Optical grade borosilicate glass, iridium coated for 5500k daylight equivalent beam Reflector: Parabolic shaped silver halide coated over etch-stippled finish to eliminate filament ring shadows Remote switch (optional accessory): Pressure pad, waterproof 6" cable, replaces tail cap Power source: (4) 123 series Lithium batteries Rechargeable,(2)3.7 volt 2400MA batteries Powered by (4) cr123 lithium batteries (included) Lockout bezel assembly completely disables the light as needed Replaceable steel belt clip is big enough to work with military web belts Lifetime warranty - excludes bulbs and batteries Made in USA Specifications: Diveable to 100' Wattage: 6.5 watts Voltage: 12 Volts Nominal, 7.2 volts in rechargeable mode Output: 500 Lumens/450 Lumens rechargeable Length body: 10" Head: 2.25" Diameter Body: 1.18" Diameter Dimensions: 2.75" H x 2.69" W x 10.69" D -
Dark OPS strictly enforces MAP pricing. MAP must be followed in order to advertise these knives for sale MAP $30.95 The HellFighter X-4 Tactical Entry light is perfect for someone that wants a lightweight yet durable and bright light on their side or in their pocket. The X-4 is not suitable for weapons mounting like the other lights in the HellFighter line but makes a perfect back up light for your duty belt, car, boat, or purse. Features: Tactical light Material: MIL STD 6061 511 T6 Aircraft Aluminum alloy, body functions as heat sink Sturdy aircraft grade aluminum body Bright 70 lumens(Xenon) Powered by (2) cr123 lithium batteries (included) Lifetime warranty - excludes bulbs and batteries Made in USA Specifications: Wattage: 6.5 Watts Voltage: 6 Volts Nominal Runtime: To 1 hour, dependent on battery performance Length body: 5.25" Width head: 1" Body: 1" Diameter Dimensions: 1.75" H x 5.25" W x 10.1 D -
Save 16%
Samurai Wooden Training Sword 39.5" Wooden Katana Solid Wood With Honor Engraved Onto The Blade -
Save 20%
